keehah
13th September 2011, 10:29 PM
Go figure, this forum has no searchable information on cymatics.
Let me start a new thread:
It is beautiful, de-occulting, and IMO offers a key to many people to begin to understand the nature of matter and the universe.
TEDTalks: Evan Grant: Making sound visible through cymatics
http://www.youtube.com/watch?v=CsjV1gjBMbQ
http://en.wikipedia.org/wiki/Ernst_Chladni
Ernst Florens Friedrich Chladni (German: [ˈɛʁnst ˈfloːʁɛns ˈfʁiːdʁɪç ˈkladnɪ]; 1756–1827) was a German physicist and musician. His important works include research on vibrating plates and the calculation of the speed of sound for different gases. For this some call him the "Father of Acoustics". He also did pioneering work in the study of meteorites, and therefore is regarded by some as the "Father of Meteoritics" as well.
...Chladni plates
One of Chladni's best-known achievements was inventing a technique to show the various modes of vibration on a mechanical surface. Chladni repeated the pioneering experiments of Robert Hooke of Oxford University who, on July 8, 1680, had observed the nodal patterns associated with the vibrations of glass plates. Hooke ran a bow along the edge of a plate covered with flour, and saw the nodal patterns emerge.
Chladni's technique, first published in 1787 in his book, Entdeckungen über die Theorie des Klanges ("Discoveries in the Theory of Sound"), consisted of drawing a bow over a piece of metal whose surface was lightly covered with sand. The plate was bowed until it reached resonance and the sand formed a pattern showing the nodal regions. Since the 20th century it has become more common to place a loudspeaker driven by an electronic signal generator over or under the plate to achieve a more accurate adjustable frequency.
Variations of this technique are commonly used in the design and construction of acoustic instruments such as violins, guitars, and cellos.
http://upload.wikimedia.org/wikipedia/commons/thumb/3/31/Chladni_guitar.svg/220px-Chladni_guitar.svg.png
Chladni modes of a guitar plate
Turn your sound down for this one...
Cymatics DIY Experiment
http://www.youtube.com/watch?v=1iXY2BE1S8Q
The main frequency is too low to be heard by humans of course...
RT: Scary! Massive waves on huge road bridge send Volgograd drivers asphalt surfing
http://www.youtube.com/watch?v=WEQrt_w7gN4
And the same concept 'with a twist', at with 3D electromagnetic frequencies!
Amazing Liquid Metal
http://www.youtube.com/watch?v=ULSG3pkjoT4
Let me start a new thread:
It is beautiful, de-occulting, and IMO offers a key to many people to begin to understand the nature of matter and the universe.
TEDTalks: Evan Grant: Making sound visible through cymatics
http://www.youtube.com/watch?v=CsjV1gjBMbQ
http://en.wikipedia.org/wiki/Ernst_Chladni
Ernst Florens Friedrich Chladni (German: [ˈɛʁnst ˈfloːʁɛns ˈfʁiːdʁɪç ˈkladnɪ]; 1756–1827) was a German physicist and musician. His important works include research on vibrating plates and the calculation of the speed of sound for different gases. For this some call him the "Father of Acoustics". He also did pioneering work in the study of meteorites, and therefore is regarded by some as the "Father of Meteoritics" as well.
...Chladni plates
One of Chladni's best-known achievements was inventing a technique to show the various modes of vibration on a mechanical surface. Chladni repeated the pioneering experiments of Robert Hooke of Oxford University who, on July 8, 1680, had observed the nodal patterns associated with the vibrations of glass plates. Hooke ran a bow along the edge of a plate covered with flour, and saw the nodal patterns emerge.
Chladni's technique, first published in 1787 in his book, Entdeckungen über die Theorie des Klanges ("Discoveries in the Theory of Sound"), consisted of drawing a bow over a piece of metal whose surface was lightly covered with sand. The plate was bowed until it reached resonance and the sand formed a pattern showing the nodal regions. Since the 20th century it has become more common to place a loudspeaker driven by an electronic signal generator over or under the plate to achieve a more accurate adjustable frequency.
Variations of this technique are commonly used in the design and construction of acoustic instruments such as violins, guitars, and cellos.
http://upload.wikimedia.org/wikipedia/commons/thumb/3/31/Chladni_guitar.svg/220px-Chladni_guitar.svg.png
Chladni modes of a guitar plate
Turn your sound down for this one...
Cymatics DIY Experiment
http://www.youtube.com/watch?v=1iXY2BE1S8Q
The main frequency is too low to be heard by humans of course...
RT: Scary! Massive waves on huge road bridge send Volgograd drivers asphalt surfing
http://www.youtube.com/watch?v=WEQrt_w7gN4
And the same concept 'with a twist', at with 3D electromagnetic frequencies!
Amazing Liquid Metal
http://www.youtube.com/watch?v=ULSG3pkjoT4