78 new pieces of orgonite. Made by me, given away for free. [Pics]

[TheNocturnalEgyptian]

Greetings GSUS. As many of you know, I am big into orgonite, spreading it over as wide an area as possible.


Most of these pieces have been gifted already. I've been visiting a certain health food store regularly and over the months and many people ask about the orgonite pendant that I wear. It is a pleasure to sometimes speak about orgonite, as many people are quite receptive to it, and they want some. I always tell them they can make it themselves, but I felt like giving a gift so I decided to make some for the nice people.

Anyway, I recently poured and mentioned it here. These are the pics. After curing the pieces in the sun for two weeks, I walked to the health food store and stayed for a little while handing these out for free. A few people gave me gifts in return, which was cool. The manager stayed open a little later for me, which was really nice, and I gifted the store, with permission no less, with 12 full TBs. (it's a small store) Since that time the energy in my neighorhood has been fantastic, we had rain the next day (hahaha) and the sky has been clear and blue ever since.

Most people took home 1-2 TB and 1-2 pocket pieces. I just told them to take whatever was instinctual. Whatever spoke to them. The employees were all digging it.

Damn that felt good






http://farm7.static.flickr.com/6094/6222418284_12e4e9c962_b.jpg


http://farm7.static.flickr.com/6152/6221897527_3d609718b3_b.jpg





http://farm7.static.flickr.com/6178/6222416964_d135f3fd3b_b.jpg

http://farm7.static.flickr.com/6098/6221895493_4d1a0128c3_b.jpg

http://farm7.static.flickr.com/6058/6222415308_d168ec9da2_b.jpg

[TheNocturnalEgyptian]

http://farm7.static.flickr.com/6152/6221897527_3d609718b3_b.jpg

http://farm7.static.flickr.com/6226/6221895989_848b3c9656_b.jpg

http://farm7.static.flickr.com/6101/6222417740_13efc2f939_b.jpg

http://farm7.static.flickr.com/6032/6221896713_c1ecffc4eb_b.jpg


http://farm7.static.flickr.com/6236/6222418516_6df78f4492_b.jpg

http://farm7.static.flickr.com/6215/6221897793_f6be44eb57_b.jpg


About the pieces


Well these pieces are made with Steel turnings and brass shavings. This is also the first time I have used any type of metal foil and it was my test run. All the pieces have one pieces of single or double-terminated quartz, and about 40 of them are tibetian quartz while the others are not.


About the viewing window

This is the first time I have decided to do the viewing window. My instincts said that it would make human gifting more mentally palpable if there was a stone visible, so I went with it.


My feelings on the foil:

Gold, Silver, and Copper foil were used evenly. The Copper and Gold had the best energy. The silver did not show up very well but its energy was nice. Just not as nice as the gold or copper.

The rocks

I gave each piece 1 or 2 stones that were not quartz. In the big TG/HHG thing, you can see I did a 6 pattern, 3 blades of blue kyanite, and 3 quartz points. (points don't really show up)

In the viewing window, which I did for energetic flavor and eye appeal, I deployed tourmaline, garnets from lena (thank you), danburite, petalite, zincite, Jasper, Agate, Amethyst, Amber, chipped turquoise, selenite, kyanite. Did one piece with Black Kyanite, good fan shape. . But the key here is that I only used 1 or 2 stones that were not quartz in a piece. Just 1 extra stone for flavor, ya know? : )


We are all students and I am still learning. Questions, Comments, Concerns? Happy gifting!



P.S. My girlfriend says 'these shorted out the camera the first time I tried to take a picture and I had to reboot the software.' Direct quote. She did a great job with the pictures. I just make the stuff.

[Gaillo]

What's the theory here? First I've heard of this... ???

Does this have something to do with "Orgone" energy that the German/Austrian guy (I forget his name, but I think it's something like "Risch" wrote about?

[Neuro]

They are BEAUTIFUL!

How do you measure the energy?

[Golden]

Beautiful! I've been wanting to do this. Any info/links and experiences are greatly appreciated!

[Twisted Titan]

I'm facsinated by this stuff.....

so each of these stone somehow affects the. feild around us?

[keehah]

What's the theory here? First I've heard of this...
A more aetheric form of negative ion generator.

Here are the results of a study with a negative ion generator (4.5 x10 14 ions/second) with grounded bed sheet used for 11/2 hours per night:
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC3116537/bin/fig-8.jpg
http://ajp.psychiatryonline.org/cgi/content/full/163/12/2126

CONCLUSIONS: Naturalistic dawn simulation and high-density [negative] ionization [with grounding] are active antidepressants
Just grounding: http://www.ncbi.nlm.nih.gov/pmc/articles/PMC3116537/

I'd need more scientific result before buying one, but would have loved the opportunity to be gifted one, for placebo effect alone!
They look great NE!

[TheNocturnalEgyptian]

What's the theory here? First I've heard of this... ???

Does this have something to do with "Orgone" energy that the German/Austrian guy (I forget his name, but I think it's something like "Risch" wrote about?

Yes, this is the open-source progression of the works of Wilhelm Reich. Reich was a scientist who fled Nazi Germany and came to America, he is the only known scientist to have his books burned by Nazi Germany as well as the United States Govt. Reich was interfacing directly with the US Air Force in the 1940's and 50's, he claimed he could control the weather, cure cancer, and fight aliens with his technology. Tesla and Victor Shcauberger had related works.


After Reich publicly created rain on June 6, 1953 and was paid for it, a court summons was issued. He responded by writing and was put in jail for it. While in jail ALL of his works were absorbed by the US gov, and all public copies of his works burned by court order. He died in an FDA prison under mysterious circumstances. His work was deeply underground until the advent of the early 1990's and the internet. His books made a comeback and today there is quite a large number of "gifters", i.e. individuals who deploy these devices and others like them in urban and rural environments. This has the express goal of negating HAARP and other weather modification technologies, and bringing back natural weather patterns.

These devices operate on the same concept as radar-defeating paint used in the air force. Alternating layers of carbon and non-carbon based material have a unique property of sucking Electro-magnetic frequency towards them - they just do. Air force uses this technology, and so does the microwave industry, they call them "loaders" and they are used to clean up microwave radiation spills, theirs are just resin and iron shavings.


The addition of quartz adds a piezoelectric component, quartz creates a voltage potential when it is compressed, this resin shrinks about 10%, this voltage potential constantly clears the devices, there is no need for grounding. There are varying theories about how they work exactly, but the results are clear and reproducable. They help plants grow. They make water freeze in very strange shapes. And they affect the weather, almost universally for the better, encouraging flow in previously stagnant systems.


There is not a word in english for the concept of alternating layers of organic and inorganic material attracting EMF. (organic, in chemistry, means carbon-based) But it is generally an accepted and proven rule that this does occur.


There are also versions of these devices that use electro-magnetic induction by some very specific insultation being installed during construction.



TOO LONG, DIDN'T READ: These devices encourage the return of natural weather patterns, help plants grow faster against a control, and partially negate the negative effects of power lines, cell phones, wifi signals, HAARP, and any other EMF that swims around us on a daily basis.


I didn't believe it at first either, then I did my tests. Then I did more tests. Then I looked at hundreds of other people's tests. And It works.

[TheNocturnalEgyptian]

They are BEAUTIFUL!

How do you measure the energy?

There are allegedly electronic devices which measure the energy (life meter) but they are home made and I do not trust them. A reliable way may be to get a zapchecker (ambient EMF detector) and measure a cell phone tower's output with it. Then gift the tower and re-measure output, noting any decrease.

But the easiest way to measure the effectiveness is just to sprout some seeds. The stronger the orgonite, the higher germination % you will have, and the plants will grow faster in the same amount of time. Here's a test that was done:

Water-cress seeds, from same bag, split into two groups, given same amount of water and sunshine, in an non-orgonized environment. The TB is the only source of orgone. They are only brough together for the pictures, during the test they were about 100 feet apart.

By the end of day 1 we see germination in the orgonite group, but not in the control group.
http://i149.photobucket.com/albums/s42/XIxZer0xIX/EndofDay1.jpg

By the end of day 5, you can really see the difference. Same seeds, same conditions, orgonite is the ONLY difference!

http://i149.photobucket.com/albums/s42/XIxZer0xIX/Day5Comparison.jpg


Close ups from day 5 :

Control:
http://i149.photobucket.com/albums/s42/XIxZer0xIX/Close-upDay5noorgone.jpg

Enhanced with Orgonite:

http://i149.photobucket.com/albums/s42/XIxZer0xIX/Close-upDay5withorgone.jpg

[Gaillo]

Nocturnal,
Thanks for the explanation! Do you sell these? I'd like to obtain one and do some experiments...

[TheNocturnalEgyptian]

Selling is a lot of stress. Until now I've made them and given them out for free. Several board members helped me with early beta testing, acquiring metals, etc. I've slightly improved my skills since then.

I think I have a list of several people already who want a piece.

Heimdahl gets an HHG with spent brass in the low density section.

SirGonzo420 gets a set too.

Milehi gets a pocket piece with titanium in it...eventually. When I get good enough.


I think a few other people asked me for pieces as well. I sent beta-test versions to gsus board members and they noticed some slight differences, I think my construction has gotten better since then however. I can just add your name to the list, LOL.


And yes, to answer twisted titan, it is my opinion that the stones subtly affect the energy output, although many would cally that hippy-dippy nonsense.

There is slight science to support it however. For example, it is PROVEN that black tourmaline absorbs EMF. Also, it is proven that tourmaline creates a magnetic field when it is under pressure. So whether or not those are good things, is up to the individual to decide, but at the very least, we are sure that these phenomena exist on a basic level. But not everyone feels anything from stones. Lots do.


Our member, Sunny&Seventy, had trouble sleeping for a week after receiving his orgonite....too much energy at first...but he loved it so much he made his own and posted about it here.

We are all students and I am always learning.

it's an awesome hobby guys. I will teach anybody how to make these for free.

[Neuro]

I guess the glasses were kept apart, or does orgonite only work in the close range? What distance do they have an effect on plants?

[Twisted Titan]

Just some interesting reading that may introduce a counterbalance

DYODD

http://www.rogermwilcox.com/Reich/index.html

[Gaillo]

Selling is a lot of stress. Until now I've made them and given them out for free. Several board members helped me with early beta testing, acquiring metals, etc. I've slightly improved my skills since then.

I think I have a list of several people already who want a piece.

Heimdahl gets an HHG with spent brass in the low density section.

SirGonzo420 gets a set too.

Milehi gets a pocket piece with titanium in it...eventually. When I get good enough.


I think a few other people asked me for pieces as well. I sent beta-test versions to gsus board members and they noticed some slight differences, I think my construction has gotten better since then however. I can just add your name to the list, LOL.


And yes, to answer twisted titan, it is my opinion that the stones subtly affect the energy output, although many would cally that hippy-dippy nonsense.

There is slight science to support it however. For example, it is PROVEN that black tourmaline absorbs EMF. Also, it is proven that tourmaline creates a magnetic field when it is under pressure. So whether or not those are good things, is up to the individual to decide, but at the very least, we are sure that these phenomena exist on a basic level. But not everyone feels anything from stones. Lots do.


Our member, Sunny&Seventy, had trouble sleeping for a week after receiving his orgonite....too much energy at first...but he loved it so much he made his own and posted about it here.

We are all students and I am always learning.

it's an awesome hobby guys. I will teach anybody how to make these for free.

Thank you! Yes, please add my name to the list.

BTW, I occasionally have brass, steel, and aluminum turnings from my machine shop that I typically just throw out (I take the brass turnings to a metal recyclery for FRN's)... would you like any of that, or do you already have a good source?

Also, if the Titanium does anything "special", I have a few pieces and I could send you a little bit to include in mine... let me know.

Again, thanks for the info - it looks fascinating!

[TheNocturnalEgyptian]

I guess the glasses were kept apart, or does orgonite only work in the close range? What distance do they have an effect on plants?

The range for plant growth assistance is fairly short, less than 10 feet is what my anecdotal experiences say.

The range for scrubbing electromagnetic activity is more like 100-500 yards away from the source, you do not have to be very close.


The range of both is directly proportional to the mass of the device. More mass, more range.

[TheNocturnalEgyptian]

Just some interesting reading that may introduce a counterbalance

DYODD

http://www.rogermwilcox.com/Reich/index.html


I respect you a lot for being able to look at both sides of the issue and doing your own due diligence. "It is the mark of an educated mind to be able to entertain an idea without accepting it." -Aristotle

Here are some points which may help your research and clear common confusions

1- Reich made orgone accumulators. Alternating layers of steel and wool. A box you sit inside. 2D layering, requires grounding to eliminate excess energy.

2- Orgonite is a new invention after Reich's death but based on his work. He never made these types of pieces. Resin, Metal, Quartz. 3D layering, more surface area exposed in smaller space. Due to piezoelectricity no need for grounding.

3- Reich spent much of his later years focusing on this work and cloud-busting, many people try to use his sexual theories to discredit his work, but those were just things he wrote about, if you look at his actual experiments they were mostly related to etheric energy.



here are some pics of ice frozen in proximity to orgonite. Orgonite has no moving parts whatsoever yet can create physically improbable patterns in the ice during freezing.


Perfect SIN wave - this is not magic, it is the harnessing of pre-existing natural laws:

http://h8.abload.de/img/img_2341ptal.jpg

http://i1211.photobucket.com/albums/cc432/metaFunctional/Ice%20tests/167344_142200809170720_132640960126705_262894_2081 021_n.jpg

Causing stalagmites:

http://i1211.photobucket.com/albums/cc432/metaFunctional/Ice%20tests/DSC02338.jpg

http://farm6.static.flickr.com/5289/5382354901_8bae613c72.jpg


Causing unusual bulging in the water:

http://farm6.static.flickr.com/5300/5462861514_21a650426c.jpg

http://img33.imageshack.us/img33/812/clearwater0.jpg

http://i.imagehost.org/t/0980/DSCF0025.jpg


Causing a motherfucking VORTEX despite having no moving parts:
(some water fell down the pipes of a cloudbuster and froze overnight. This is what was pulled out of the pipe, you can see the spot where the large quartz crystal (partially exposed, but under pressure) was at the bottom.)

http://www.whale.to/b/18120703hd1n45xs.jpg

http://www.whale.to/b/181207046kzc2yep.jpg


Good luck with research please report any findings, whether negative or positive.

[TheNocturnalEgyptian]

Orgonized Garden Produces Mutant Vegetables:

http://www.whale.to/b/pete%20and_sx.jpg

[Heimdhal]

Hey, i still want some for my garden!

[Serpo]

Orgonite: A proven effective solution.

This is a purely informational site about orgonite, a simple compound anyone can create in their backyard with fairly inexpensive, widely-available materials which balances ambient energy by turning the negative energy into positive energy, with many easily-confirmed effects. Orgonite does this continuously, 24 hours a day, 7 days a week, without electricity.
Quick Facts About Orgonite:



Simple. Easy to make. Works continuously.
Turns negative energy into positive energy.
Purifies the atmosphere, detoxifies water, ends drought.
Helps plants grow better, repel pests & require less water.
Mitigates harmful effects of EMF radiation.
Disarms and repels predatory forms of life.
Inspires a pleasant demeanor and balanced, happier moods.
Frequently remedies insomnia and chronic nightmares.
Helps awaken your innate psychic senses.


What Else You Should Know

This is not a joke, or a game, or an advertisement. This is not a business opportunity. We don't want your money. Orgonite vendors exist only to serve those who are not able to or interested in making orgonite themselves. Orgonite does not require belief or conscious intention in order to work. This is not a religion, a cult, or a product of disinformation of any kind. This has nothing whatsoever to do with the "newage movement."

We have found that tactical deployment of orgonite (e.g., "gifting") by throwing, hiding or burying it near sources of electromagnetic radiation or other pollution or in polluted areas, such as near cellphone/TV/radio towers, power plants, in lakes, rivers and ocean harbors, has a powerful and noticeable effect on the area. The skies get clearer and return to the deep blue color you remember from your childhood, complete with normal puffy white clouds. Water pollution levels decrease precipitously, as documented (http://www.torontobeach.ca/press/innews/20040630-2.htm) in Toronto, Ontario (http://moonbeammemos.blogspot.com/2004/11/mega-cb-in-3d-updated.html). Drought conditions are reversed, as documented in South Africa (http://www.orgonise-africa.net/category.aspx?categoryID=47) and in Death Valley, California (http://www.msnbc.msn.com/id/7182113/). The general mood or "vibe" in the area improves dramatically as people are kinder, happier and more easy-going. Neighbors either become friendlier or suddenly leave town. A renewed sense of hope begins to pervade the community. We have seen this effect in our own communities as a direct result of tactical orgonite gifting, and have found it truly self-empowering, but don't take our word for it. Try it yourself and see what happens!

There are those of us involved with this "gifting movement" who believe that the proliferation of electromagnetic pollution, cellphone towers and chemtrails are not an accident, but are intentional acts of malfeasance by the parties who seek to benefit or profit from inflicting illnesses upon the populace. We don't ask that you believe us, or subscribe to our beliefs. What we do ask is that you help combat the pollution that is wreaking so much harm throughout our communities around the world. We ask you to contribute to the health and well-being of your friends, family and neighbors by following the simple steps outlined on this site, regardless of whether you agree with our personal opinions and convictions. We ask that you follow the instructions here and seek your own personal confirmation of the effectiveness of orgonite.

http://www.orgonite.info/

[Serpo]

Reminds me of ormus in some ways..............http://www.subtleenergies.com/ormus/cone.htm

[midnight rambler]

Holy hand grenades Batman!

[Large Sarge]

I gifted orgonite for awhile, good for you Nocturnal

eventually I got myself an orgone blanket, pretty impressive.

http://www.orgonics.com/blankets.htm

you can really feel the orgone under one fo the blankets, tingles, feels weird, face will flush, etc

anyway, I let a few neighbors and friends try it, they felt it also.

orgone is amazing stuff...

[Horn]

I'm so Horny if I got my hands on some orgonite I might explode.

[Glass]

There are allegedly electronic devices which measure the energy (life meter) but they are home made and I do not trust them. A reliable way may be to get a zapchecker (ambient EMF detector) and measure a cell phone tower's output with it. Then gift the tower and re-measure output, noting any decrease.

But the easiest way to measure the effectiveness is just to sprout some seeds. The stronger the orgonite, the higher germination % you will have, and the plants will grow faster in the same amount of time. Here's a test that was done:

Water-cress seeds, from same bag, split into two groups, given same amount of water and sunshine, in an non-orgonized environment. The TB is the only source of orgone. They are only brough together for the pictures, during the test they were about 100 feet apart.

By the end of day 1 we see germination in the orgonite group, but not in the control group.
http://i149.photobucket.com/albums/s42/XIxZer0xIX/EndofDay1.jpg

By the end of day 5, you can really see the difference. Same seeds, same conditions, orgonite is the ONLY difference!

http://i149.photobucket.com/albums/s42/XIxZer0xIX/Day5Comparison.jpg


Close ups from day 5 :

Control:
http://i149.photobucket.com/albums/s42/XIxZer0xIX/Close-upDay5noorgone.jpg

Enhanced with Orgonite:

http://i149.photobucket.com/albums/s42/XIxZer0xIX/Close-upDay5withorgone.jpg

Hi TNE. I find this very interesting and I did read a lot about the orgone collectors a while back and then I started to see people writting about the orgonite.

A couple of days ago I came across someone who had been experimenting with electro stimulation of plant roots. I'll call it electro stimulation for want of a better description. Anyway what he/they had discovered was that very low stimulation caused phenomenal plant growth even in extremely low light. Even plants that were pretty much in twilight were growing faster and larger than was normal.

He was using the solar cell that comes with one of those solar garden lights and attaching a couple of stiff wire electrodes which were placed either side of the plant stem. The voltages are pretty low but I think thats the point. The solar feed the voltage directly into the root space.

Because the plants were growing so big and fast he said the only "downside" was you had to keep the food up to the plants because they would use it up so quick and if you didn't keep them fed they would grow but look thin and weedy but with enough food the growth was phenomenal.

Germination was the other thing he talked about and he said it increased success and the speed of the germination.

So for me, I have now seen 2 clear examples, using different methds, but they do show how much, good energy when delivered to the right place can enhance things, plants, atmosphere etc. I think it's time for me to learn how to make these.

Thanks for sharing. Inspirational TNE, inspirational.

[gunDriller]

Hi TNE. I find this very interesting and I did read a lot about the orgone collectors a while back and then I started to see people writting about the orgonite.

A couple of days ago I came across someone who had been experimenting with electro stimulation of plant roots.

very interesting !

i can't help but wonder if the geometry of the roots is different between the 2. and maybe the water level, or something.

since the one with orgonite has an orgon object within 1 inch of all the roots, what would you think of putting the grow-rock media in a 1 inch wide tray ? then making a few such trays. one gets orgon objects sitting next to it on both sides, or however many you think is right for the experiment.

in the other tray, the root geometry is identical, but, no orgon.


is the orgonite a substance that absorbs RF and microwave energy, or do you think of it in a different way ?

[sunnyandseventy]

That's some serious orgonite. I can feel it. Those amber ones stand out.
Gifting is awesome. Got pieces to several cousins out of state during a visit last week.

Did some pouring over the last two days:
Made an 8" pie plate with metal turnings and a heavy resin mix of aluminum and red iron oxide powders. Threw in chinese mini's, black tourmaline, selinite, blue keyanite, garnet, and rose quartz.
Wanted a copper piece so I did a standard size muffin with cut up copper scrubby, copper turnings, and a bronze powder resin mix. Chinese mini crystal, selinite, garnet, and blue keyanite.
Decided to go big and did a pint beer glass with plain metal, all the stones that were in the pie plate, and a very light copper powder resin mix. I think this will look cool when it comes out of the mold!

[Glass]

very interesting !

i can't help but wonder if the geometry of the roots is different between the 2. and maybe the water level, or something.


Excellent questions. I can't speak to something I don't know about but from what I read there was some difference. I came across the electrical stimulation stuff when reading on a Freeman forum. Seems a lot of freemen are cannabis smokers as well....... for some mysterious reason. go figure. Anyway the stuff I was reading was at a place called grasscity.

I've got a few broken solar garden lights so I'm going to make a couple up and put near my veggies and see how I go.

sunnyandseventy Can I ask where you get the metal from? Are you producing your own or sourcing from a workshop somewhere? thx.

[Heimdhal]

Id like to buy one, from whoever, preferably a GSUS'er, for my garden and perhaps my home. Where can I get some?


Also, TNE, sorry the machine shop scrap thing fell through, they started hoarding it pretty bad and Im not in the department anymore so I no longer have access :(

[sunnyandseventy]

I went with this company after messaging with TNE about orgonite. Bought several items from them along with materials for making orgonite.

http://www.orgonecrystals.com/catalog/orgonite.html

The 12 TowerBusters is a good starter.

[sunnyandseventy]

sunnyandseventy Can I ask where you get the metal from? Are you producing your own or sourcing from a workshop somewhere? thx.

I'm buying my metal. The link in one of the previous posts has a good deal on a box of metal. Still have a 1/3 left from the one I bought several weeks ago.

BB's work well. So do copper scrubbies after you cut them up.

Didn't have any luck with local machine shops for sourcing metal. I'm going to have to go the couple scrap dealers here and see if they've got anything I can use.
Seems like the shops didn't want to deal or had someone sucking up their scrap already.

[AndreaGail]

Id like to buy one, from whoever, preferably a GSUS'er, for my garden and perhaps my home. Where can I get some?


+1
I'd be interested as well

[hoarder]

My brother makes this kind of stuff and sells it on Ebay. He makes almost enough to live on and is gradually expanding his business.

[Serpo]

Wilhelm Reich and the Orgone Accumulator

The Device the U.S. Government Wanted Destroyed



By Mary Bellis (http://inventors.about.com/bio/Mary-Bellis-496.htm), About.com Guide

See More About:


orgone energy (http://inventors.about.com/lr/orgone_energy/382431/1/)
wilhelm reich (http://inventors.about.com/lr/wilhelm_reich/382431/2/)
free energy (http://inventors.about.com/lr/free_energy/382431/3/)


http://0.tqn.com/d/inventors/1/G/M/_/orgone.jpgorgone accumulator


Inventors Ads

Energy Healing (http://inventors.about.com/z/js/o.htm?k=energy%20healing&d=Energy%20Healing&r=http://inventors.about.com/od/qrstartinventors/a/orgone.htm)
Buy Orgone (http://inventors.about.com/z/js/o.htm?k=buy%20orgone&d=Buy%20Orgone&r=http://inventors.about.com/od/qrstartinventors/a/orgone.htm)
Orgone Wilhelm Reich (http://inventors.about.com/z/js/o.htm?k=orgone%20wilhelm%20reich&d=Orgone%20Wilhelm%20Reich&r=http://inventors.about.com/od/qrstartinventors/a/orgone.htm)
Orgone Cloud Buster (http://inventors.about.com/z/js/o.htm?k=orgone%20cloud%20buster&d=Orgone%20Cloud%20Buster&r=http://inventors.about.com/od/qrstartinventors/a/orgone.htm)
Orgone Box (http://inventors.about.com/z/js/o.htm?k=orgone%20box&d=Orgone%20Box&r=http://inventors.about.com/od/qrstartinventors/a/orgone.htm)







"Warning - misuse of the Orgone Accumulator may lead to symptoms of orgone overdose. Leave the vicinity of the accumulator and call the 'Doctor' immediately!" That would be the controversial Doctor Wilhelm Reich, father of orgone energy (also known as chi or life-energy) and the science of orgonomy. Wilhelm Reich developed a metal-lined device named the Orgone Accumulator, believing that the box trapped orgone energy that he could harness in groundbreaking approaches towards psychiatry, medicine, the social sciences, biology and weather research.

Orgone Energy



Wilhelm Reich's discovery of orgone began with his research of a physical bio-energy basis for Sigmund Freud's theories of neurosis in humans. Wilhelm Reich believed that traumatic experiences blocked the natural flow of life-energy in the body, leading to physical and mental disease. Wilhelm Reich concluded that the libidinal-energy that Freud discussed was the primordial-energy of life itself, connected to more than just sexuality. Orgone was everywhere and Reich measured this energy-in-motion over the surface of the earth. He even determined that its motion affected weather formation.
Orgone Accumulator

In 1940, Wilhelm Reich constructed the first device to accumulate orgone energy: a six-sided box constructed of alternating layers of organic materials (to attract the energy) and metallic materials (to radiate the energy toward the center of the box). Patients would sit inside the accumulator and absorb orgone energy through their skin and lungs. The accumulator had a healthy effect on blood and body tissue by improving the flow of life-energy and by releasing energy-blocks.
The New Cult of Sex and Anarchy

Not everyone liked the theories Wilhelm Reich suggested. Wilhelm Reich's work with cancer patients and the Orgone Accumulators received two very negative press articles. Journalist Mildred Brandy wrote both "The New Cult of Sex and Anarchy" and "The Strange Case of Wilhelm Reich". Soon after their publication, the Federal Drug Administration (FDA) sent agent Charles Wood to investigate Wilhelm Reich and Reich's research center, Orgonon.
Troubles with the U.S. Food and Drug Administration

In 1954, the FDA issued a complaint for an injunction against Reich, charging that he had violated the Food, Drug, and Cosmetic Act by delivering misbranded and adulterated devices in interstate commerce and by making false and misleading claims. The FDA called the accumulators a sham and orgone-energy nonexistent. A judge issued an injunction that ordered all accumulators rented or owned by Reich and those working with him destroyed and all labeling referring to orgone-energy destroyed. Reich did not appear in person at the court proceedings (http://www.orgone.org/wr-vs-usa/wr0.htm), defending himself by letter. Two years later, Wilhelm Reich was in jail for contempt of the injunction, the conviction based on the actions of an associate who did not obey the injunction and still possessed an accumulator.

2007

On November 3, 1957, Wilhelm Reich died in his jail cell of a heart failure. In his last will and testament Wilhelm Reich ordered that his works be sealed for fifty years, in hopes that the world would someday be a place better to accept his wondrous machines.
What the FBI Says

Yes, the FBI does have a whole section on their website dedicated to Wilhelm Reich. This is what they had to say:

This German immigrant described himself as the Associate Professor of Medical Psychology, Director of the Orgone Institute, President and research physician of the Wilhelm Reich Foundation, and discoverer of biological or life energy. A 1940 security investigation was begun to determine the extent of Reich's communist commitments. In 1947, a security investigation concluded that neither the Orgone Project nor any of its staff were engaged in subversive activities or were in violation of any statue within the jurisdiction of the FBI. In 1954 the U.S. Attorney General filed a complaint seeking permanent injunction to prevent interstate shipment of devices and literature distributed by Dr. Reich's group. That same year, Dr. Reich was arrested for a Contempt of Court for violation of the Attorney General's injunction.


Wilhelm Reich Inventor of the Orgone Accumulator


Wilhelm Reich Museum (http://www.wilhelmreichmuseum.org/)
Books on Orgone Energy (http://erclk.about.com/?zi=12/oGT)
Movies about Wilhelm Reich (http://erclk.about.com/?zi=12/oGU)


http://inventors.about.com/od/qrstartinventors/a/orgone.htm




also..http://www.orgone.org/articles/ax2001-grnfld-aa.htm

[TheNocturnalEgyptian]

I am thinking of making Orgonite belt buckles next if anybody can help me find good belt buckle blanks for it. It would need a long and malleable bezel in order for me to work with it and really seal my orgonite in there. I haven't been able to find anything like that.

http://shop.rings-things.com/cart/pc/catalog/3/0/30-682-00-as_back.gif


For those who I have promised to gift, I have not forgotten about you. I am just planning an even grander piece.

[Twisted Titan]

Anytime The Feds and Courts order your work destroyed.

Cleary you are on to something they dont want others to know about.

[Cebu_4_2]

Can't help with the buckles but can with any printing involved. Hit me up.

[Buddha]

Id like to buy one, from whoever, preferably a GSUS'er, for my garden and perhaps my home. Where can I get some?


Same here, I've looked into making it but at my apartment it really isn't possible.

[LastResort]

Thanks for starting this informative thread TNE. I've been so busy at work, and finally had time to read through this.

I find this "energy" sort of stuff really fascinating. I bought an EMF protector made out of silver over 2 years ago. I put it on the first afternoon I bought it but had to take it off while in bed that night. It gave me a wicked headache that instantly went away when I took it off! Put it back on the next morning and have been fine with it ever since. Definately know its doing something.

[DMac]

I'll pay in silver for one (or more) of these!

[k-os]

I have wanted one of these since way back in the day at GIM (RIP) but I didn't want to ask (I'm a chicken). You had an awesome and very extensive thread about orgonite over there if I remember correctly.

I'd love to make them too! Do you need any special tools for making them? I have these copper and brass strips that are used in building stained glass pieces. Would I need to cut them up or shave them or something?

This is very exciting! I can't wait to do my own experiments in the garden . . . and to hopefully help with insomnia.

[chad]

reading this thread, i did the water experiment last night in my freezer. i put a piece on top of a water glass and froze it. this morning, i had water heaved up towards the orgonite, and a frozen swirly column of water in the middle of the glass. tried taking a pic, but they didn't turn out (frost keep appearing on the glass and blurring it up).

it was was cool. going to try and put a piece on the top and bottom tonight and see what happens.

[TheNocturnalEgyptian]

I have wanted one of these since way back in the day at GIM (RIP) but I didn't want to ask (I'm a chicken). You had an awesome and very extensive thread about orgonite over there if I remember correctly.

I'd love to make them too! Do you need any special tools for making them? I have these copper and brass strips that are used in building stained glass pieces. Would I need to cut them up or shave them or something?

This is very exciting! I can't wait to do my own experiments in the garden . . . and to hopefully help with insomnia.



Nah, they're easy to make. Metal, Resin, 1 piece of quartz. You just put all this in your mold together.

Any mold, metal, glass, or silicon, will work, although silicon is easiest to handle.

The rest are artistic flourishes that aren't necessary for the operational strength of the device. The different metals do have a small personality difference (steel different from gold) and certain metals resonate better with technology while others resonate better with humans - but almost all metals work for almost all purposes.



Resin is carbon-based
Metal is non-carbon based
The crystal is squeezed by shrinking/curing resin

All there is to it!

[TheNocturnalEgyptian]

reading this thread, i did the water experiment last night in my freezer. i put a piece on top of a water glass and froze it. this morning, i had water heaved up towards the orgonite, and a frozen swirly column of water in the middle of the glass. tried taking a pic, but they didn't turn out (frost keep appearing on the glass and blurring it up).

it was was cool. going to try and put a piece on the top and bottom tonight and see what happens.


Thank you so much for the independant verification =)

[chad]

Thank you so much for the independant verification =)

i used one of the clear ones you made with quarters, dimes, + pennies in it. the swirly column was really cool. going to try and get some better pics tomorrow.

[Silver Rocket Bitches!]

I made my first orgonite this summer. I used cut up copper scrubbers, cut up steel wool, titanium turnings purchased off ebay and gold flake. Bought a big bag of quartz from a local new age shop. Wrapped the quartz in copper wire and also put some copper wire in the shape of a coil on the bottom.

For the moulds I used a couple dollar store martini glasses and a pyramid mould I found on ebay.

It was fun to do and I think it turned out well for my first time. I could see how this hobby could get addicting.

Thanks to TNE for the inspiration and instruction!

1280

[beefsteak]

Nah, they're easy to make. Metal, Resin, 1 piece of quartz. You just put all this in your mold together.

Any mold, metal, glass, or silicon, will work, although silicon is easiest to handle.

The rest are artistic flourishes that aren't necessary for the operational strength of the device. The different metals do have a small personality difference (steel different from gold) and certain metals resonate better with technology while others resonate better with humans - but almost all metals work for almost all purposes.



Resin is carbon-based
Metal is non-carbon based
The crystal is squeezed by shrinking/curing resin

All there is to it!

TNE,
my wife and I are enjoying so very much this thread. So very sorry we didn't stumble across it on the old GIM. Would have given us a chance to experiment sooner. This looks very remarkable to us.

We have some initial questions if you have the time to answer.

1) Is there a suggested number of metal varieties per each one? Like some brass, some steel, some gold, some silver, some ? or is it just 3 or more?

2) Did you pour your resin in layers so that the various items would display best, like your shell on the bottom, and then the shavings?

3) If yes, you pour in layers, do the layers adhere to each other well, when you add the "next" layer, or do you wait until the bottom layer is totally cured before adding the next layer and next material?

4) This quartz crystal you include, is that like centered in the unit, sticking up? horizontal? does it matter? I can't see it in each one so I'm assuming it is "buried centrally" more or less.

5) Are there ratios that one should be aware of like so much of one metal over another metal's included shavings?

6) Are there ratios of shavings to size of quartz?

7) Do these organite things ever lose there ooomph?

8 ) With those two bowls of seed being germinated simultaneously sit next to each other, do you have any theories as to why the organite effect in the left bowl doesn't "creep over/benefit the right side bowl?" Does that have something to do with the silicon/quartz base in the glass container?

Not trying to make this complicated, okay? Just trying to understand and do it right the first time.

You are very creative and very generous with your gifting this knowledge and your pieces.

THANK YOU!

beefsteak

[ximmy]

I'm still not understanding what they do... :( ???

[Dogman]

I'm still not understanding what they do... :( ??? They act like flux capacitors.

[keehah]

They act like flux capacitors.
WTF? ;D
http://www.youtube.com/watch?v=zq5-6PkVGCg (Back to Future clip)
The Jules may be better than the Vern model.

[sirgonzo420]

Id like to buy one, from whoever, preferably a GSUS'er, for my garden and perhaps my home. Where can I get some?


Also, TNE, sorry the machine shop scrap thing fell through, they started hoarding it pretty bad and Im not in the department anymore so I no longer have access :(

Me too!

I could probably make my own, but I would "trust" someone else's more, lol.

GSUSer-made orgonite is probably supercharged!


Interesting stuff to say the least!

[Heimdhal]

K-os

if you really want to make some, so do I so what say you we get together sometime soon and have a go at it? I want some for my garden in the worst way.

[k-os]

K-os

if you really want to make some, so do I so what say you we get together sometime soon and have a go at it? I want some for my garden in the worst way.


Heck yeah! Let's do it!

[sirgonzo420]

If'n y'all wanna make some extra, you've got a buyer!

[Heimdhal]

Sweet. Its gonna have to wait till november though, with the baby coming this week and the big shoot at the end of the month, my plate is just about as full as it can get without Meghan just destroying me..... :(

[sunnyandseventy]

Hope you don't mind but I'm going to answer some of these questions. TNE's answers may differ, but that's the wonderful thing, anyone can make orgonite, there's no one set way.


TNE,
my wife and I are enjoying so very much this thread. So very sorry we didn't stumble across it on the old GIM. Would have given us a chance to experiment sooner. This looks very remarkable to us.

We have some initial questions if you have the time to answer.

1) Is there a suggested number of metal varieties per each one? Like some brass, some steel, some gold, some silver, some ? or is it just 3 or more?
There are "formulas" or "recipes" regarding metal. As one experiments and researches they'll find many different opinions and varieties. The main thing is you try to achieve a 50/50 ratio of metal to resin. When first learning to pour it's best to use any scrap metal you can find cheaply. If one screws up their resin/hardener mixture and it doesn't become hard it can make a huge mess and waste of material.

2) Did you pour your resin in layers so that the various items would display best, like your shell on the bottom, and then the shavings?
It appears he did. Yes this the idea, but more experienced pourers claim that layers make stonger "O".

3) If yes, you pour in layers, do the layers adhere to each other well, when you add the "next" layer, or do you wait until the bottom layer is totally cured before adding the next layer and next material?
This is a balance. If your bottom layer cures to quickly it will shrink slightly, resulting in your following layer seeping down around the previous. Whether you time right or not the layers should adhere fine

4) This quartz crystal you include, is that like centered in the unit, sticking up? horizontal? does it matter? I can't see it in each one so I'm assuming it is "buried centrally" more or less.
There is a "science" to building strong or tuned orgonite. But it is not necessary. You can confidently drop a tiny crystal into a mold (muffin pan, shot glass, martini glass, etc. Then add metal and pour in the resin/hardener mixture. Stir. Wait. And bingo, orgonite

5) Are there ratios that one should be aware of like so much of one metal over another metal's included shavings?
Again, there's methods and recipes out there. Most important is a 50/50 metal to resin ratio and a crystal.

6) Are there ratios of shavings to size of quartz?
Read above.

7) Do these organite things ever lose there ooomph?
There are theories to this. I believe in using self cleansing crystals. I also believe the orgonite cleanses itself and never loses power.

8 ) With those two bowls of seed being germinated simultaneously sit next to each other, do you have any theories as to why the organite effect in the left bowl doesn't "creep over/benefit the right side bowl?" Does that have something to do with the silicon/quartz base in the glass container?

Not trying to make this complicated, okay? Just trying to understand and do it right the first time.

You are very creative and very generous with your gifting this knowledge and your pieces.

THANK YOU!

beefsteak

[sunnyandseventy]

TNE referred me to this forum:

http://www.warriormatrix.com/index.php?sid=05132e52acaedb34a8bcd5c29fda1d06

There's a lot of information and pictures here.
Also you can search yt for orgonite making videos.

[learn2swim]

Cool, seems like your having fun!

[milehi]

I have a question. I'm making some tomorrow with titanium wire holding the cyrstal. The titanium wire will be spiraled down throughout the piece, and I need to know if it should be coiled clockwise, or counter-clockwise. Or, does it even matter?

[TheNocturnalEgyptian]

I have a question. I'm making some tomorrow with titanium wire holding the cyrstal. The titanium wire will be spiraled down throughout the piece, and I need to know if it should be coiled clockwise, or counter-clockwise. Or, does it even matter?


It does not really matter, if you are just doing a single direction coil. Some people like to reverse the direction on the coiling, like it doubles back on itself, and the theories start getting complicated when it comes to that.

Also coiling is a bit difficult to get correct in the sense that it will output energy effectively. One of the things that always held me back initially was a focus on coiling and not enough focus on the basics, since coils are not really necessary. They are, however, quite helpful if you can do them RIGHT. The only way to do them right is to make them and observe. I'm still not there yet!



I'll link you some common coil patterns. These are what I would consider very cleanly made coils. Sorry I can't be of more help here, I just want to emphasize that coils are not necessary for orgonite, it's like a whole sub-set of study to be honest.

Also, insulated coils around the crystal with a frequency put through the wires is how you make a Succor Punch. Here's a pic of that:

Crystal, Wrapped with insulated wire, pulsed at 15Hz and embedded in orgonite:

http://farm3.static.flickr.com/2522/3685072668_a4024b03a6.jpg

Here are the "passive" (i.e. non-powered) coils that are commonly used....

http://www.ryanmcginty.com/orgone/sbb9.jpg

http://www.orgonite-portugal.com/IMG3274.jpg

http://whale.to/b/coil.jpg

http://www.stenulson.net/energy/10dhcoil.jpg

http://www.ethericwarriors.com/ip/files/posted_images/user_9_sany0916.jpg

http://www.justbepainfree.com/mm5/graphics/00000001/CB4_insert_2.jpg

[TheNocturnalEgyptian]

Thanks Beefsteak, this comment brings me joy : )

I'll be happy to answer, although sunny&seventy did a great job already


TNE,
my wife and I are enjoying so very much this thread. So very sorry we didn't stumble across it on the old GIM. Would have given us a chance to experiment sooner. This looks very remarkable to us.

We have some initial questions if you have the time to answer.

1) Is there a suggested number of metal varieties per each one? Like some brass, some steel, some gold, some silver, some ? or is it just 3 or more?

The number of metals doesn't matter so much as the amount of metal exposed to the amount of resin. The higher this surface area, the stronger it is. So for example, metal turnings have a much higher exposed surface area than metal BBs. We usually refer to this as "high density" orgonite or "low density orgonite" etc. Metal powder, because it is very fine, would be super-high density.

2) Did you pour your resin in layers so that the various items would display best, like your shell on the bottom, and then the shavings?

I do pour in layers, although this is not necessary. Layered pours are a good way to get an artistic seperation between layers, or if you are using resin pigments to dye the layers. This is purely asthetic, except in the case of "induction" towerbusters, where a layer of clear resin is added between two layers of orgonite to create an insulated layer. Search iTB to know more about that.

3) If yes, you pour in layers, do the layers adhere to each other well, when you add the "next" layer, or do you wait until the bottom layer is totally cured before adding the next layer and next material?

The layers adhere extremely well. Resin cures at a high temperature and the layers will bond with one another. They will not be seperable. S&S correctly pointed out that sometimes your first layer can shrink, and you can have misfourtune where the 2nd layer bleeds down into the space around the 1st layer, but that's only in rare cases where the individual uses way too much chemical catalyst. (catalyst heats the resin, too much overheats it and causes excessive shrinkage, just follow the package's directions)

4) This quartz crystal you include, is that like centered in the unit, sticking up? horizontal? does it matter? I can't see it in each one so I'm assuming it is "buried centrally" more or less.

It's usually centered. I did a batch of TB's with the quartz sticking out the top of the TB's just so I could get a feel for the different positions. It does not really matter that much as long as it is buried centrally. There is an art to perfect crystal placement however, it's more about understanding harmony and intuition than there being a specific spot. It depends heavily on the crystal.

5) Are there ratios that one should be aware of like so much of one metal over another metal's included shavings?

Nah, just 50% resin, 50% metal by volume - plus one piece of quartz. You can achieve certain harmonies by mixing metals, but it is not necessary. Aluminum and steel work really well for negating cell phone towers while copper and gold work really well for human oriented gifting - but steel/alu would work on humans and gold/copper would work on cell masts. People also use tin, zinc, magnesium in small amounts...the list goes on. I have a bismuth pendant and milehi is working on a titanium one.

6) Are there ratios of shavings to size of quartz?

One word of caution is that when your density increases, your quartz needs to increase too. So if you are using metal powder, it is way too dense for one piece of quartz to do the job. When using metal powder, I use quartz powder as well so I have a very even and thorough application. For normal metal shavings, one piece of quartz is fine. If I was making a BIG piece, several gallon size, I would use perhaps 5-10 pieces of quartz. So the more massive or more dense your piece is, use more quartz. Also, it cannot be rock quartz! It must be crystaline quartz!

7) Do these organite things ever lose there ooomph?

Some do after a few years. A piece with no quartz will lose it after a month or so, the quartz keeps it fresh. Some people add selenite and blue kyanite, claiming a longer life span. Many orgonite pieces are still fully functional after 10 years in operation. The owner has a lot to do with it. Normal maintenance might be quarterly rinsing with cold running water (grounding) or playing a tuning fork near the device to (hopefully) resonnate the crystal inside. The ones gifted in the wild are near their gift, so they keep feeding on that.

8 ) With those two bowls of seed being germinated simultaneously sit next to each other, do you have any theories as to why the organite effect in the left bowl doesn't "creep over/benefit the right side bowl?" Does that have something to do with the silicon/quartz base in the glass container?


They were seperated for the duration of the test and brought together only for pictures. In my experience, the distance that a plant can be helped by orgonite is small, roughly 10 feet for a 3oz. TB. Meanwhile that same 3oz. TB can negate a cell phone tower from almost 100 yards away.

Not trying to make this complicated, okay? Just trying to understand and do it right the first time.


Not at all, if you think of any other questions I'd be happy to answer them, and it sounds like others on here have steered you in the right direction as well.

You are very creative and very generous with your gifting this knowledge and your pieces.

THANK YOU!

beefsteak



Be well and please do not hesiate with any questions.

[TheNocturnalEgyptian]

Further reading on these topics at this this old thread:
http://gold-silver.us/forum/showthread.php?25388-I-need-help-finding-scrap-base-metals-for-a-side-project/page8

Felt good to actualize it. When I made that thread, all this was just a dream.


Some of the embedded images don't show up because the old forum appended width/height code automatically when I posted images. But if you really want to see the pictures just follow the source URL. I'll get around to fixing the links eventually. For now I've got to go workout, I don't want Solid to be disappointed in me : )

[chad]

did some more water experiments last night.

took 2 wine glasses and filled them to about 1/2 inch from the top. put orgonite on top, froze them.

both of these wine glasses have been frozen numerous times before with alcoholic drinks in them with no problems.

this morning when i took them out, they were ruined. spider cracks all through the glass on both of them. one of them had actually had the glass shatter in the freezer, when took it out half the glass had already fallen off the glass and in to the freezer.

in the 2 pics i've attached, you can see the little 'bubble lines' in the frozen water. both glasses had these radiating at about a 30 degree angle up towards the orgonite. you can also see how the water is 'heaved up' on the top of the frozen water. you'd expect it to be flat. both of them were like this.

http://i54.tinypic.com/2mxibsg.jpg

http://i52.tinypic.com/2mos3ly.jpg

[sirgonzo420]

I have got to get some of this shit and do some experiments!

The garden pictures are nuts.

[Awoke]

Egyptian, I remember when you first started talking about this on GIM. You have come a long way with it. I would hazard to say that you are as close to being an "Internet expert" as possible.

Inspiring thread. Great work. Thanks for being so selfless with your creations.

[MNeagle]

both of these wine glasses have been frozen numerous times before with alcoholic drinks in them with no problems.



Chad, that's because alcohol never really freezes solid. Water (obviously) does! And expands as well.

[Awoke]

Causing a motherfucking VORTEX despite having no moving parts:
(some water fell down the pipes of a cloudbuster and froze overnight. This is what was pulled out of the pipe, you can see the spot where the large quartz crystal (partially exposed, but under pressure) was at the bottom.)

http://www.whale.to/b/18120703hd1n45xs.jpg

http://www.whale.to/b/181207046kzc2yep.jpg


Good luck with research please report any findings, whether negative or positive.

Are these your own personal photo's? Why are they dated 2007?

[chad]

Chad, that's because alcohol never really freezes solid. Water (obviously) does! And expands as well.

yeah, i suppose. just found the number of cracks really weird. it was like shatterproof glass that was all smashed up.

i find the water "jumping up" stuff really odd.

[TheNocturnalEgyptian]

Are these your own personal photo's? Why are they dated 2007?

That one is not mine. Only the photos in the OP (of the gift that went to the store/people) are 100% mine. A lot of these photos have been collected by me over the years. The one you are asking about, the vortex, was sourced from a forum which no longer exists, and I couldn't bear the thought of it disappearing. I try to note when I am providing pictures that are not mine, but sometimes it gets away from me.


It's from a cloudbuster pipe. Rainwater fell in the pipe overnight and froze in that pattern. That plug of ice is what was removed in the morning.

I haven't ever made a cloud-buster.

Cloud-busting and frequency projection via succor punches are the last realms of Orgonite....they're not really possible for the new student for multiple reasons.

I'm getting ready to make my first frequency generator soon.

Here is the work of sensei

That crystal will be pulsed with 15Hz Square Wave

http://i1226.photobucket.com/albums/ee403/cutter10/orgon106.jpg

http://i1226.photobucket.com/albums/ee403/cutter10/orgon108.jpg

http://farm7.static.flickr.com/6012/5989075740_ab74dbeaae_z.jpg

http://farm7.static.flickr.com/6131/5989077354_b0eaf6dc8d_z.jpg

http://farm7.static.flickr.com/6014/5989080626_14f713f072_z.jpg

http://farm7.static.flickr.com/6009/5988520553_fd432378f1_z.jpg

http://farm7.static.flickr.com/6134/5989088308_847af2496b_z.jpg

[k-os]

That is so cool!

[ximmy]

So, is orgonite like tapping into the power of the force?

[Horn]

Aha, you need a small fish eye at the top of the pyramid.

[chad]

So, is orgonite like tapping into the power of the force?

don't use it for evil, ximmy, once started down that path is impossible to return.

[ximmy]

don't use it for evil, ximmy, oce started down that path is impossible to return.

Just wondering if it taps into the force or is it more of a deflector shield??

[sunnyandseventy]

Just wondering if it taps into the force or is it more of a deflector shield??

I think it's both.

[ximmy]

I think it's both.

I'm thinking of hooking up a bunch of them in a series and routing them into a power inverter

[Awoke]

Totally understandable NE, and I want to be clear that I appreciate what you do. The photos you post in this thread are amazing, whether they're your or not. I only asked because I was curious. Thanks for all your contributions in this thread dude.

[TheNocturnalEgyptian]

So, is orgonite like tapping into the power of the force?

Kind of. Any ancients who somehow managed to duplicate this technology would have certainly thought so. As you have read I am struggling to define this in scientific terms, I want to bridge the gap between science and etheric, but it's not easy.

Some people have speculated that a similar technology has already been seen in history. For example, Ghengis Khan, was said to own a palace over which it NEVER rained, even if a storm was raging all around the palace. Sounds to me like somebody figured out how to push clouds away using some sort of primitive energy generator...

[TheNocturnalEgyptian]

Lazou has gifted 20+ countries, he keeps a journal located here:

http://www.materiaetherica.com/heavenandearth/Contents

[ximmy]

Kind of. Any ancients who somehow managed to duplicate this technology would have certainly thought so. As you have read I am struggling to define this in scientific terms, I want to bridge the gap between science and etheric, but it's not easy.

Some people have speculated that a similar technology has already been seen in history. For example, Ghengis Khan, was said to own a palace over which it NEVER rained, even if a storm was raging all around the palace. Sounds to me like somebody figured out how to push clouds away using some sort of primitive energy generator...

Thanks for the reply, I find these things fascinating. I'd think it would have been good if Willy Wonka had this technology when he built the prince pondercherry's palace...


http://www.youtube.com/watch?v=OW9Zvzhf_Rg

http://www.youtube.com/watch?v=OW9Zvzhf_Rg

[milehi]

I picked up some polyester resin from the local marine supply place, and it's somewhat opaque so I decided to not do the artsy coils. Instead, I made some martini glass TB's using copper BB's and cobalt chromium chips. Tomorrow I'm going to stop by the surf shop and pick up some clear gloss resin for my artsy projects I have in mind. I was going to use some gold leaf also, but I did an acid test with the 10k solution and it dissolved. Oh well.

[TheNocturnalEgyptian]

That sounds really perfect. It's going to work. Overdo it on the copper BB's, use a lot of them. You'll be happy with it! I can't wait to see it...sounds like it is curing now?


Marine supply is a great place to get resins, they use it for boats and surfboards. I hear it is expensive there however. Best price I've found is FRN35.50/gallon at http://uscomposites.com/polyesters.html - Simlar 41 Waterclear Resin with Catalyst

I've also looked into making my own molds (custom shapes!) soon. Apparently this is really easy to do, there is a type of silicon that you paint onto any object, and it dries and becomes a mold of that object. Looking into this


Milehi your stuff sounds great. I still haven't cracked the titanium you sent me, but I'm getting ready to try.

[sunnyandseventy]

Marine supply is a great place to get resins, they use it for boats and surfboards. I hear it is expensive there however. Best price I've found is FRN35.50/gallon at http://uscomposites.com/polyesters.html - Simlar 41 Waterclear Resin with Catalyst


No doubt about it. When I finally got motivated to pour I didn't leave enough time to order resin from US Composites. Bought a gallon and hardener from West Marine. Over $175! Could have had 4 gallons shipped from USC for that price.

[Awoke]

Noticed this in this thread this morning:

http://gold-silver.us/forum/attachment.php?attachmentid=1302&d=1318506425


Just sayin'

[Awoke]

Has anyone ever put Rare Earth Magnets in with Organite?

[beefsteak]

TNE,
Thank you for your reply, and you as well, S&70. Very encouraging.

A couple of new questions. Has there been any work you know of where creating then gifting one for the purpose of placing in the vicinity of a dementia sufferer or alzheimer's loved one, especially in 3rd party residential care, has (I don't want to use the term "produced" but that's what I'm thinking) helped with clarity for that loved one?

I've recently become aware of the University of Colorado research where classical music in 4x4 time played in the presence of formerly robust now impaired loved ones adds in clarity, especially if it is background playing when visited by friends and family while it's playing.

Since music works, why not amp it all up with Organite?

Any thoughts? Anyone you could ask if you are drawing a blank?

[beefsteak]

TNE, or anyone else familiar with this organite creating/resin process

the other new question.

I noticed a metal (tin) form used in the creating of that fascinating pyramid piece you photo-posted. How tough is it to de-mold the resin from a tin form such as that.

While you are investigating your silicon molding concept, I'd suggest you investigate Micro-Mark products. That's a wonderful source for varying amount of this quick mold material about which you are seeking more info.

Wonderful company, high quality, long-time supplier referral.

http://www.micromark.com/Casting-and-Molding-Supplies.html

Question: what does "TB" abbreviation in this thread mean, please? Head scratching here...

PS...was that actual gold in the golden pour portion of that pyramid or do you know?


beefsteak

[Heimdhal]

Hey, as friendly service to yall caster, I have a vaccum heat moldable plastic molder on hand. I use it to make gun molds, but I can make 3d mold of nearly any object, in fairly good detail with it. If yall have a particular iten you'd like to make into orgonite, PM and I'll see what we can do about.


Mine is a little more "garage made" than this, but it shows the basic function:
http://www.youtube.com/watch?v=aqAtiawy81g

[sunnyandseventy]

A couple of new questions. Has there been any work you know of where creating then gifting one for the purpose of placing in the vicinity of a dementia sufferer or alzheimer's loved one, especially in 3rd party residential care, has (I don't want to use the term "produced" but that's what I'm thinking) helped with clarity for that loved one?


Sounds like you've got the head for this Beefsteak. I encourage you to make your own.
PS: TB=tower buster

[chad]

what does pouring it with wires inside + hooking up those electrodes to it do?

[ximmy]

Has anyone ever put Rare Earth Magnets in with Organite?

It's probably not wise to imagine things that could disrupt the natural order of the cosmos...

[Silver Rocket Bitches!]

TNE, or anyone else familiar with this organite creating/resin process

the other new question.

I noticed a metal (tin) form used in the creating of that fascinating pyramid piece you photo-posted. How tough is it to de-mold the resin from a tin form such as that.


I used the same tin mould to make a pyramid and it was a pain to get out. I sprayed and wiped it down with cooking spray as they say to do but when the piece was fully cured it wouldn't come out. I placed it in the freezer for a good 10 hours and had to drop it on concrete to finally get the piece out. Of course, this chipped the bottom of the final product.

[beefsteak]

SilverRocket,

I was looking at the Micro-Mark mold release agent and wondering if that would work with tin mold forms.

[milehi]

I wipe the inside of my martini glasses with olive oil and have no problem with releasing.

Today I'm making some with BBs, steel wool and Vitalium chips. I have extensive experience working with resin and have been doing hot batches that cure quicker without burning, in hope that they'll be ready sooner. Last night, I put one on top of a glass of water in the freezer, and nothing happened. I'm thinking it wasn't cured completely and there wasn't enough pressure surrounding the crystal. I also slept about 20 feet from the first one I made and felt nothing. The crystals I'm using are double terminated quartz, about an inch long by a quarter inch.

On a positive note, the smell of resin brought back a flood tide of memories from when I was a teenager, glassing surfboards in the garage with my dad.

[Tumbleweed]

TNE I've been gathering steel and brass to make organite with and I'm wondering about the quartz. I have small white quartz rocks in the gravel on hill tops where I live. Does the quartz have to be crystals like you rap wires around or will just quartz rock do?

[sunnyandseventy]

It's got to be quartz crystal. Not rock.

[sirgonzo420]

Selling is a lot of stress. Until now I've made them and given them out for free. Several board members helped me with early beta testing, acquiring metals, etc. I've slightly improved my skills since then.

I think I have a list of several people already who want a piece.

Heimdahl gets an HHG with spent brass in the low density section.

SirGonzo420 gets a set too.

Milehi gets a pocket piece with titanium in it...eventually. When I get good enough.


I think a few other people asked me for pieces as well. I sent beta-test versions to gsus board members and they noticed some slight differences, I think my construction has gotten better since then however. I can just add your name to the list, LOL.


And yes, to answer twisted titan, it is my opinion that the stones subtly affect the energy output, although many would cally that hippy-dippy nonsense.

There is slight science to support it however. For example, it is PROVEN that black tourmaline absorbs EMF. Also, it is proven that tourmaline creates a magnetic field when it is under pressure. So whether or not those are good things, is up to the individual to decide, but at the very least, we are sure that these phenomena exist on a basic level. But not everyone feels anything from stones. Lots do.


Our member, Sunny&Seventy, had trouble sleeping for a week after receiving his orgonite....too much energy at first...but he loved it so much he made his own and posted about it here.

We are all students and I am always learning.

it's an awesome hobby guys. I will teach anybody how to make these for free.

I was just rereading this epic thread when I noticed I had somehow missed this post!

I smiled ear to ear when I read it.

:)


Thank you for all you do and for being you, TNE!

[Silvestor]

Interesting.

I might try this using the gold plated pins from some old CPU's, as well as the gold from some video cards and ram if I can remove it easily.

[TheNocturnalEgyptian]

Has anyone ever put Rare Earth Magnets in with Organite?

Sure, a lot of people do this. It requires a cold cure so the heat does not demagnetize the lode. Neodymium is usually cited as being preferred.


There are camps of people who say the magnetism is a positive addition, others who say the opposite, it doesn't seem to mess with the results too much, but proponents claim there is a subtle difference in the output.

Since I have not tried it, I have no personal comment.

Btw, look into the Joe Cell, I think you would like it.

[TheNocturnalEgyptian]

TNE I've been gathering steel and brass to make organite with and I'm wondering about the quartz. I have small white quartz rocks in the gravel on hill tops where I live. Does the quartz have to be crystals like you rap wires around or will just quartz rock do?

Greetings Tumbleweed, glad to hear it. To answer your question, the quartz must have a crystalline structure. Even though rock quartz and crystal quartz are both made of Silicon Dioxide, only the crystalline structure will generate a voltage potential when it is put under pressure or mechanical stress.

All types and subtypes of quartz crystal will work, which means clear quartz, amethyst, citrine, smoky quartz will all work for you. But if it has matrix strewn through it, it cannot be used as the main driver crystal.

That being said, you can use almost any size crystal, small or large. One crystal for 3 Oz. of mass is great. For 12 Oz. we say 1-5 crystals is plenty. When employing multiple crystals in larger devices, we almost always use symmetrical patterns, so as to have even spacing and even output.



Here are some of my opinions on optional matters:

Double Terminated crystals are stronger than single terminated, ST are still powerful enough to be used exclusively.

It is possible to tune or program a quartz crystal with a certain resonance via tuning fork before embedding in the orgonite mixture.

Also you should have a pleasant and good frame of mind during construction as some individuals believe that the human brain is capable of generating a frequency, and quartz resonates with any frequency it is nearby.

If you believe in prayer or meditation it is helpful to do it beforehand as this can raise your frequency. Have clear intentions.

[Buddha]

"It is possible to tune or program a quartz crystal with a certain resonance via tuning fork before embedding in the orgonite mixture. "

Being a musician I find this intriguing. Most tuning forks vibrate with an F pitch. The middle C is what all of tonal music is based upon. Perhaps the C would be optimal, and also, perhaps embedding the quartz with different pitch will yield differnt results or flavors. When a super nova explodes it releases a perfect middle C. No matter how far one deviates from the path it must come back to the center.

[Silver Rocket Bitches!]

SilverRocket,

I was looking at the Micro-Mark mold release agent and wondering if that would work with tin mold forms.

It looks like that stuff is made for rubber molds but would probably work with tin as well since it's a lubricant. I've read that spraying with wd40 or something comparable works as well but leaves the finished product kinda greasy.

[Awoke]

Here's another question, considering what you stated about metal-to-resin surface area being important:

Would super-fine metal powder work, from grinding stainless steel, etc?

[Libertytree]

It looks like that stuff is made for rubber molds but would probably work with tin as well since it's a lubricant. I've read that spraying with wd40 or something comparable works as well but leaves the finished product kinda greasy.

There's a silicone spray made for heavy duty garage doors that would probably be better than WD40 because WD also has combustibles in it as well.

I've always wanted to tinker with this project, primarily for gardening but it is cool in many other regards too. Time to start collecting more metals.

[sunnyandseventy]

Metal powders work well. There's one making decorative plaques with all copper powder orgonite. They look beautiful, like a copper plate on the wall but orgonite.

[keehah]

Here are the results of a study with a negative ion generator (4.5 x10 14 ions/second) with grounded bed sheet used for 11/2 hours per night:
I ordered the negative ion generator used in the study. It comes with a wrist band so a grounded conductive bed sheet is not needed.
http://www.chronotherapeutics.org/AirIonizer_ENG.html

Nature produces currents of fresh air containing negative ions. The level (or density) of negative ions varies widely with the seasons and weather, indoors and outdoors, especially in the presence of air pollutants. Heating and air conditioning systems are thought to remove negative ions from your home and office. Production of negative ions minimizes the number of airborne, man-made, and naturally occurring air pollutants, combat allergens, and reduce other health hazards such as tobacco smoke. The independent clinical trials at Columbia University Medical Center have demonstrated the antidepressant effects of negative ions for seasonal affective disorder (SAD, winter depression) as well as non-seasonal chronic depression.

I'll start a thread in future weeks if I have anything to report. And I'm going to have to do some research to see how this affects airborne radioactivity.

[beefsteak]

keehah,

we'll be keenly watching for such a thread/report. Please post it also to the West Coast/Japanese Fuku tracking thread, pro or con, okay?


beefsteak

[beefsteak]

TNE,

still hoping for some response re: whether there are claims or experiences in sufferers of dementia and Alzheimers benefitting from being in the presence of a loved one's gifted organite creation?

Anything?

Thanks.


beefsteak

[TheNocturnalEgyptian]

TNE,

still hoping for some response re: whether there are claims or experiences in sufferers of dementia and Alzheimers benefitting from being in the presence of a loved one's gifted organite creation?

Anything?

Thanks.


beefsteak

Lots of people have asked about creating pieces specifically for ill family members, regarding a plethora of the major diseases, but nobody has cured any conditions. However I believe that an individual would have an easier time resting and healing in an orgonized environment. Not much formal research has been done as not every gifter knows anybody who would need this. I am always open to doing tests. If you ask out of concern for someone you know, I'll send you some and you can tell me the answer to this question.


Remember that orgonite construction itself is just a mimicry of Dr. Reich's work. Dr. Reich made Orgone accumulators, which are a totally different technology, and he made metal boxes that contained a chair. Sitting inside was the therapy. He claimed he could cure many diseases, but added that this was mostly done by understanding their root cause. Even though his work is the foundation, you have to read it as it is a whole other subject.





Here's another question, considering what you stated about metal-to-resin surface area being important:

Would super-fine metal powder work, from grinding stainless steel, etc?

Yes it would work very well but there is a learning curve in using it. Need to include powdered quartz to achieve uniform piezoelectricity as the metal powders are very dense. Without the quartz powder it will feel very flat. Like it is sucking in but not releasing. With the powder it will feel much stronger than you think it should for its small mass. Sensei makes all his necklaces using nano-iron and quartz ground to nano size. He sends away to a lab to get the raw materials.

http://farm4.static.flickr.com/3499/3972274928_3a90ee9734.jpg

http://farm3.static.flickr.com/2670/3971534041_16b5b11935.jpg


It looks like that stuff is made for rubber molds but would probably work with tin as well since it's a lubricant. I've read that spraying with wd40 or something comparable works as well but leaves the finished product kinda greasy.

wd40 works, ain't pretty but it works. There are a lot of "mold release" products that work well. A silicon mold does not need any release agent. Silicon spray will release glass or metal fairly well. Silicon Spray is all I use these days, works excellent.

[sunnyandseventy]

Yes it would work very well but there is a learning curve in using it. Need to include powdered quartz to achieve uniform piezoelectricity as the metal powders are very dense. Without the quartz powder it will feel very flat. Like it is sucking in but not releasing. With the powder it will feel much stronger than you think it should for its small mass.

Wow, I can't wait to crush some crystal and make a piece with powdered metal and crystal. I used multiple chinese mini's in a copper and aluminum powder pie dish, I didn't think it had a flat feel. Same with the other metal powder pieces. My pouring partner said she didn't feel anything from them though.

I'm wondering if the fact that I didn't use the powder metal as a 50/50 mix is the reason I can feel it. Nearly all of my powder metal pieces have scrap metal or BB's in them and a couple spoonfuls of metal were used in the resin.
My thought was it would conduct better by filling gaps in the metal and resin with some powdered metal.

Thanks for your time and effort answering everyone's questions in these threads!

PS: Is that your black Sensei pendant? Mine did the same thing over 60% of it in less than 24 hours of wear. My gold one didn't show any of that texturing, it's smooth and clear as the day I received it.

[beefsteak]

Thank you, TNE. PM sent in a few. Yes, it is an immediate family member, committed in just the last 30 days. He was intercepted going the wrong way down a major interstate south of here. Has been institutionalized continuously since this startling intervention by caring State LEOs. It's been a long month for us all!

I heard you clearly that this is not a cure. Didn't expect it to be. Just coveting some increased clarity in his altered state of consciousness now as well as new non-volitional living quarters in private, permanent care. He's allowed to have personal items as long as the family doesn't go overboard.

THANK YOU!


beefsteak

[Awoke]

Not to sound like a noob, but wouldn't the act of smashing crystals into power install some type of negative/destructive energy into the crystal shards or some other repercussion?

[sunnyandseventy]

A good orgonite primer here with "how to" videos.

http://www.orgoniteinfo.com/

[LastResort]

I got some quartz in the mail about a week ago now, for making some of my own orgonite. Too bad its way to cold out now to make some. Have to wait until spring.

They sent me 2 pieces of orgonite as a bonus. I put one of the pieces on my night table. I have been having crazy vivid dreams for about a week now. Wonder if there is some kind of connection?

[sunnyandseventy]

Educational cartoon about orgonite.

http://www.youtube.com/watch?v=DtVqsr4-CWQ&feature=player_embedded#!

[joboo]

Any updates on the plants grown with and without?

Is it repeatable, and does the effect become more noticeable as the plant ages?

[TheNocturnalEgyptian]

Any updates on the plants grown with and without?

Is it repeatable, and does the effect become more noticeable as the plant ages?

Howdy joboo, in answer to your question, I will post a few links first

From this thread on the AEGIS style induction cloudbuster. http://www.warriormatrix.com/about5045-0-asc-75.html&sid=72738b60ebd906b114bfd5af49524b36



On another forum

I’m posting this alongside Mark’s experiences with orgonite and vegetables as it seems an appropriate location.

We have a Starfruit tree in our garden and it produces delicate pink flowers and a lot of fruit much of the time.

I built a mini-Induction CB* about a month ago and underneath the tree appeared as good a place as any to set it.

http://i34.tinypic.com/1dzk8z.jpg

Yesterday Nita noticed a monster Starfruit hidden amongst the leaves right above the CB.

http://i38.tinypic.com/2zh4odg.jpg

Those of you familiar with the Starfruit (‘Blimbing’ in Indonesian) will know that they don’t usually grow bigger than the smaller example in the photograph,

I can also relate that the monster blimbing tasted delicious.

end of quote


Virgil


Here is an amateur study on watercress seeds, notice the germination %: http://gold-silver.us/forum/showthread.php?25388-I-need-help-finding-scrap-base-metals-for-a-side-project&p=349271&viewfull=1#post349271

Another about plant growth, a garden this time: http://gold-silver.us/forum/showthread.php?25388-I-need-help-finding-scrap-base-metals-for-a-side-project&p=211292&viewfull=1#post211292

There are some links with img code still attached (i.e. [img width=500 height=600]) in the final post. Although the links are still good, it was written on the old board software, which allowed me to have more than 10 images/post. However, the new software is set to limit a post at 10, max. So although the post is still there, I can only go back and fix 10 of them. To see the whole garden mentioned there, I suggest getting the source code for my image, and following it back to the original site.

[MNeagle]

Bump...

[Hillbilly]

Wow, I'd like to have one of those, really cool.

[optionT]

Id buy one!

[TheNocturnalEgyptian]

Ah this old thread. I really should pour more often than I do.

I encourage everyone to make their own orgonite. It isn't that hard!

I wish I could pour 500+ TBs and send them to everyone

[chad]

make me a tower next time, eh? :D

[Cebu_4_2]

I am very interested in making a cloud buster or two. The pipes are making it pretty restrictive in cost though. I have the crystals and resin already just need to figure out a way to get a bunch of 1 inch pipe.

[TheNocturnalEgyptian]

Yeah, the copper pipes are the most expensive part of a cloudbuster. People have made them with aluminum and steel pipes and had good effects. I don't think they necessarily have to be copper.

[Tumbleweed]

I've been gathering metal shavings from a machine shop for awhile and I'm gettting quite a bit of it. Had a friend who does metal work tell me a few days ago he had a 55 gal barrel of shavings I could have too. I'm wanting to make a "Cloud Booster" to see if I can get it to rain. I've been looking to order some crystals and they look pretty expensive for the larger ones. I'm wondering if I need some crushed crystal to add to the metal and resin too. I haven't ordered any resin yet but plan to soon.

When the government scrapped the minute man missles they abandoned the cables to them. Those cables were encased in a copper sheath that have been dug up and sold to scrap yards. I talked to a scrap dealer who was negotiating with a guy who had some and told him if he got it I would like to buy some from him. Some of it is about an inch and a half diameter and on up to three and a half inch.

[messianicdruid]

I am thinking of making Orgonite belt buckles next if anybody can help me find good belt buckle blanks for it. It would need a long and malleable bezel in order for me to work with it and really seal my orgonite in there. I haven't been able to find anything like that.

http://shop.rings-things.com/cart/pc/catalog/3/0/30-682-00-as_back.gif


For those who I have promised to gift, I have not forgotten about you. I am just planning an even grander piece.

I bought a belt buckle {brass} that had places for silver dimes {i like mercuries} is nine a propituous number?

[TheNocturnalEgyptian]

I bought a belt buckle {brass} that had places for silver dimes {i like mercuries} is nine a propituous number?

3 -5 - 7 - 9 - 13 - 17

all work for me. I like numbers that are found in nature.





I've been gathering metal shavings from a machine shop for awhile and I'm gettting quite a bit of it. Had a friend who does metal work tell me a few days ago he had a 55 gal barrel of shavings I could have too. I'm wanting to make a "Cloud Booster" to see if I can get it to rain. I've been looking to order some crystals and they look pretty expensive for the larger ones. I'm wondering if I need some crushed crystal to add to the metal and resin too. I haven't ordered any resin yet but plan to soon.

When the government scrapped the minute man missles they abandoned the cables to them. Those cables were encased in a copper sheath that have been dug up and sold to scrap yards. I talked to a scrap dealer who was negotiating with a guy who had some and told him if he got it I would like to buy some from him. Some of it is about an inch and a half diameter and on up to three and a half inch.


55 gal is more than enough. I like to use a bit of soap in the barrel to elim a majority of the machining oil, if there is any. Machine oil doesn't hurt the piece but you don't want gobs of it either, relatively clean metal works best.

Cloud buster designs are common on the net and www.warriormatrix.com (http://www.warriormatrix.com) has the plans. The crystals don't need to be anything fancy. They should be nicer than the crystals that go in to a TB, but I think 1" or 1.5" quartz crystal points should work fine.

You want them to be clean points, no extra cluster chunks at the base or alternative terminations. "Laser point quartz" is one type used.



CLOUD BOOSTER

Works best once all cell phone masts in area are orgonized with TowerBusters (TB's)

Note the quartz crystals are half inserted into resin plugs (half exposed crystals) which are dropped into the hollow copper pipes

http://ultimatevision.us/6_quartz.jpg

http://farm5.static.flickr.com/4029/4459940754_fdc7e1c584_o.jpg



http://www.bargainorgonite.com/wp-content/uploads/2012/03/CBquartz.jpg


http://orgoneenergybalancing.org/uploads/2/7/5/8/2758073/1222056_orig.jpg


http://bimg1.mlstatic.com/orgonita-cloud-buster_MLM-F-3476657004_122012.jpg

http://www.sodares24.de/WebRoot/Store19/Shops/61994215/4E9E/BACA/37D9/AE52/39F0/C0A8/29BB/5B97/SANY0031.JPG

http://www.vismaya-maitreya.pl/cloudbuster.JPG

[TheNocturnalEgyptian]

Fresh from Sensei

http://farm9.staticflickr.com/8102/8544730775_e27cc56d40_z.jpg

http://farm9.staticflickr.com/8097/8545832798_dcabc962ea_z.jpg

[Hillbilly]

Fresh from Sensei

http://farm9.staticflickr.com/8102/8544730775_e27cc56d40_z.jpg

http://farm9.staticflickr.com/8097/8545832798_dcabc962ea_z.jpg

That is freaking cool!

[Tumbleweed]

TNE I have some questions for you about building these cloud busters. Somewhere in this thread I think it was stated you could use steel or aluminum pipe instead of copper
. There is plenty of used oil field pipe I can get for about a dollar a foot for 2" pipe. What are your thoughts on using something like that? Copper pipe is really expensive and I'm not wanting to spend the money for it if I don't have to.

I don't have cell coverage or it's very poor where I live so I'm wondering how much I would have to "gift" the area where I live with HHG's? I have several thousand acres I'd like it to rain on so how many of these cloud busters and HHG's would be needed.

I've acquired some clear double terminated crystals that are only about 2" long and I'm wondering if those are big enough for the tubes in a cloud buster. What are your thoughts on these things?

[Cebu_4_2]

You want them to be clean points, no extra cluster chunks at the base or alternative terminations. "Laser point quartz" is one type used.

Well after looking at mine again they suck bad. I think I didnt get such a deal from recommended sources. Ah well right now cant afford pipe anyhow.

[Silver Rocket Bitches!]

TNE - I'm wondering where you get your metal shavings from. That's the hardest part for me; finding a good, clean source of metal.

[Tumbleweed]

I've been searching for more information on the use of steel pipes in cloud busters and I believe my question about that has been answered . It will work as well as copper but it's heavier. I may build some out of steel pipe but that's ok if they work because I have loaders I can move them with. The information I found can be found at this link.

http://www.whale.to/c/steel_pipes.html

[Cebu_4_2]

This IS great news! Big Box has metal electrical conduit cheap enough. Just wondering about the galvanized coating and about when it starts oxidizing and flaking off. Any opinion on that?

[Tumbleweed]

The pipes I'm thinking about using Cebu are rusty and from what I've been reading I don't think it will make a difference. Probably the same for the pipes you're thinking about using. This is just a guess for me though.

I get a chuckle out of your avatar and plugins will never be the same when I look at them from here on out :-)

[Tumbleweed]

Lots of information on various subjects concerning orgone at this link on orgone.

http://www.whale.to/b/orgonite.html

[Horn]

https://www.youtube.com/watch?v=WpEDvX1XoEI

Saw some ogronite receivers at the art festival today.

Is Nocturnal Egyptian even around anymore?

[singular_me]

another freedom-infinite-awareness lover that I am missing on here


Dr Wilhelm Reich vs FDA!- Free energy of Tesla (Full Films)
http://gold-silver.us/forum/showthread.php?82537-Dr-Wilhelm-Reich-vs-FDA!-Free-energy-of-Tesla-%28Full-Films%29





Is Nocturnal Egyptian even around anymore?

[Tumbleweed]

Thought I'd bump this old thread because of a comment I heard on Steve Isdahls site. Someone had said in an email to him that the government is causing these extremes in weather events. Like the hurricane "Helene".

They also commented that there's something we can do about it too and what they brought up is in this old thread but most people don't know much about it. It's about people using Orgonite to counter what our government is doing.

I'll put some links below that will shed some light on what the shadow government that rules us have been up to and keeping the information away from us.

The link to Steve Isdahls video where he reads the email to him about Orgonite.
Start at the 31:30 time mark.
https://youtu.be/WxOTQcN6o14?si=AkxIPnIt0SLO6nZz

Dane Wigington and his research on weather modification. "The Dimming".
https://www.youtube.com/watch?v=rf78rEAJvhY&t=10s


A video here from the "Redacted" site with Eric Hecker, a whistle blower about what's really going on at the South Pole. Earth quakes and weather modification.
https://www.youtube.com/watch?v=UOSGRv0SNfI&t=2848s